![Configure usb to serial mac](https://kumkoniak.com/94.jpg)
![configure usb to serial mac configure usb to serial mac](https://media.startech.com/cms/products/main/icusb2321fis.main.jpg)
Go to System Preferences and click on Network. One common test is to connect a 56K serial modem to the PL-2303 adapter. 4 of 12 - August 4, 2011ĥ Using the USB-to-Serial Device under Mac OS X The following steps will show how to use the PL-2303 device under Mac OS X operating system: 1. NOTE: Mac OS may also pop-up a new network interface when it detects a new USB-Serial Controller device. If you try to plug another PL-2303 device, you should also see several tty.usbserialx listed where x is the assigned device number similar to Windows COM port assignment. You can run the Terminal program under Applications-Utilities folder and type the following commands: cd /dev ls tty.usbserial* You should see the tty.usbserial device which means the USB serial device is already setup properly. You can then proceed to check if the USB serial port device is setup properly. This means that the hardware device is detected by your Mac computer. Click USB hardware inside System Profiler and look for USB-Serial Controller or USB-Serial Controller D. You can first run the System Profiler program under the Applications-Utilities folder. After rebooting the system, you can now plug the PL-2303 USB-to-Serial adaptor or cable to the USB port. Close all programs and click Restart to complete installation and reboot the system. At the end of the installation, you will need to restart your computer. Click Continue to proceed and follow the succeeding instructions to complete the installation. Click on the driver installer file to run the driver installation process. Click on the DMG file to extract the driver installer package.
![configure usb to serial mac configure usb to serial mac](https://i.ytimg.com/vi/vzCNfBux1h0/maxresdefault.jpg)
The PL-2303 Mac OS X driver package contains the DMG compressed image file. Download the Mac OS X Universal Binary driver from Prolific website. The driver can be downloaded from the Support webpage of the Prolific website: System Requirement The following requirements are needed: Mac OS X 10.1 to 10.7 operating systems (includes 64-bit support) Also supports Mac OS X Lion 10.7 (see page 12) Apple Mac OS X compatible computers (Intel or PowerPC based machines) USB 1.1 or higher port PL-2303 USB-to-Serial Cable Adapter PL-2303 Mac OS X Universal Binary Driver Mac OS X Driver Installation The following steps will show how to install the PL-2303 device under Mac OS X operating system: 1.
![configure usb to serial mac configure usb to serial mac](https://docs.netgate.com/pfsense/en/latest/solutions/_images/putty1.png)
1 PL-2303 USB-to-Serial Bridge Controller Mac OS X Universal Binary Driver Installation Guide Introduction This installation guide document shows the procedure for installing the MacOS X driver for Prolific PL-2303 (H/HX/X) devices.
![Configure usb to serial mac](https://kumkoniak.com/94.jpg)